Membrane filters have a known uniform porosity of predetermined size sufficiently small to trap microorganisms.Membrane filters with a 0.45 µm pore size have long been recognized as the standard for growth of microorganisms.
Using the MF technique, sample is passed through the membrane using a filter funnel and vacuum system. Any organisms in the sample are concentrated on the surface of the membrane.  The membrane, with its trapped bacteria, is then placed in a special plate containing a pad saturated with the appropriate medium.
The passage of nutrients through the filter facilitates the growth of organisms on the upper surface of the membrane. The discrete colonies that form on the surface of the membrane can be easily transferred to confirmation media. Special media and dyes can be used to make it easier to detect certain types of organisms than with the conventional plate count. During incubation the organisms grow into colonies which appear on the membrane surface.
The MF technique is an effective, accepted technique for testing fluid samples for microbiological contamination. It involves less preparation than many traditional methods, and is one of a few methods that will allow the isolation and enumeration of microorganisms.  Membrane filters are used extensively in the laboratory and in industry to sterilize fluid materials.
 Advantage of Membrane Filter Technique
  • Permits testing of large sample volumes.
  • Reduces preparation time as compared to many traditional methods.
  • Allows isolation and enumeration of discrete colonies of bacteria.
  • Provides presence or absence information within 24 hours.
  • Effective and acceptable technique to monitor drinking water.
  • Useful for bacterial monitoring in the pharmaceutical, cosmetics, electronics, and food and beverage industries.
  • Allows for removal of bacteriostatic or cidal agents that would not be removed in Pour Plate, Spread Plate, or MPN techniques.
Step-by-step Procedures
  1. Collect the sample and make any necessary dilutions.
  2. Select the appropriate nutrient or culture medium. Dispense the broth into a sterile Petri dish, evenly saturating the absorbent pad.
  3. Flame the forceps, and remove the membrane from the sterile package.
  4. Place the membrane filter into the funnel assembly.
  5. Flame the pouring lip of the sample container and pour the sample into the funnel.
  6. Turn on the vacuum and allow the sample to draw completely through the filter.
  7. Rinse funnel with sterile buffered water. Turn on vacuum and allow the liquid to draw completely through the filter.
  8. Flame the forceps and remove the membrane filter from the funnel.
  9. Place the membrane filter into the prepared Petri dish.
  10. Incubate at the proper temperature and for the appropriate time period.
  11. Count and confirm the colonies and report the results.

Related Posts:

  • Microscopic count of Bacteria Enumeration of microorganisms is especially important in dairy microbiology, food microbiology, and water microbiology. Direct Microscopic count/ Total cell count Direct microscopic counts are possible using special slide… Read More
  • Methyl Red / Voges-Proskauer (MR/VP) Methyl Red / Voges-Proskauer (MR/VP) This test is used to determine which fermentation pathway is used to utilize glucose. In the mixed acid fermentation pathway, glucose … Read More
  • Viable count/ plate count technique Dilution: with both the spread plate and pour plate methods, it is important that the number of colonies developing on the plates not be too large because on crowded plates some cells may not form colonies and some col… Read More
  • Types of Bacterial Culture Media Culture media are solutions containing  nutrients and  physical growth parameters necessary for microbial growth. All microorganisms cannot grow in a single culture medium and, in fact, many can’t grow in any kn… Read More
  • Pour plate Technique A pour plate is a method of melted agar inoculation followed by petri dish incubation. A known volume (usually 0.1-1.0 ml) of culture is pipette into a sterile petri plate; melted agar medium is then added and mixed well … Read More

0 Comments:

Powered by Blogger.

Visitors

225185
Print Friendly Version of this pagePrint Get a PDF version of this webpagePDF


 download University Notes apps for android

Popular Posts

Flag Counter